Inverter installation is not able to be installed in the environment can be exposed, especially rain will lead to moisture is very not possible, but also do not allow the inverter power supply on the above the appearance of any water. The temperature of the inverter should be controlled between 1-40 degrees Celsius, can not be higher than him or lower than him.
The inverter is also not able to be installed in the middle of an easy-to-burn object and cannot be placed in a place that is easily exposed to dust. If the cable is long or not, but you need to isolate the inverter and the battery, the battery is also not exposed outside, the resulting gas is very strong a corrosive, if the time is very long will damage the inside of the inverter. Inverter and the ground connected to the place is directly connected to their own load above, the inside of the power supply is able to control their own technical applications, the basic type of a circuit is still very simple, but their own output with Ningbo content is also very large, but also because the current inside is very large, After the transfer out of their own multiple to carry out their own power supply of a design content is very small, is also able to put the inside of the elegant waveform, and then obtained a very wide range of an application.