Today's inverters, there are square wave output and sine wave output two, square wave output efficiency is relatively high, but the use of square wave output inverter indicators will change, so some accuracy requirements are relatively high does not apply. Although the sine wave inverter is not as efficient as the square-wave inverter, it makes up for the problem above the wave accuracy.
So sine wave inverter is also widely used in production and life, so how should we use sine wave inverter correctly?
First of all, we should find the relevant technical personnel to install, installation environment should choose a ventilated, clean environment, and to ensure that the DC power output voltage or battery voltage and inverter requirements on the DC input voltage to match, other in accordance with the inverter installation instructions for installation. It can be used after the installation is complete. Before use, should carefully read the instruction manual, first of all, the inverter boot, to ensure that the power supply DC input voltage and AC output voltage connection correct and stable, to ensure that the correct step, you can turn on the DC input switch, and then the inverter will emit '
Drop ', and then the inverter will go into the self-test state, when the inverter has been turned on can be used, here is to say in particular to open the inverter, and then open the load. During use, the inverter system audio Light Warning system, if you want to mute it, then just press the warning key to turn it off, want to open again, just need to press the warning key again. When the use is complete, first turn off the load, and then turn off the inverter, just press the shutdown key, see the indicator light slowly darken on it.